Cikakken jagora don ƙirƙirar sashi a cikin SolidWorks mataki-mataki

Idan kuna farawa da SolidWorks ko ma idan kun riga kun yi amfani da shi akai-akai, tabbas kun yi mamakin menene mafi kyawun hanyar zuwa. ƙirƙirar yanki daga karce a cikin taro ko yadda ake haɗa sassa da yawa cikin raka'a ɗaya. SolidWorks kayan aiki ne na 3D CAD mai ƙarfi mai ƙarfi wanda ke ba da hanyoyi da yawa don tsara abubuwan haɗin gwiwa, kuma idan kun san yadda ake amfani da kowane zaɓi, zaku iya haɓaka lokaci da haɓaka daidaiton ƙira.

A cikin wannan labarin mun yi bayani dalla-dalla yadda ake ƙirƙirar sashe a cikin SolidWorks, duka biyun da kansa kuma a cikin taro, kuma za mu rufe tsarin aiwatar da ayyukan. ƙirƙiri haɗin haɗin gwiwa daga da yawaZa mu yi amfani da daftarin aiki a matsayin tushe, inganta shi tare da mafi dacewa, bayyananne, da kuma hanya mai sauƙi, wanda aka ƙera ta yadda kowane mai amfani-ko da ba tare da gogewar farko ba-zai iya bin matakan kuma ya fahimci kowane ra'ayi.

Ƙirƙiri sabon sashi a cikin mahallin taro

SolidWorks yana ba da damar fasali mai fa'ida da ake kira "Design in Context". Wannan dabarar ta ƙunshi ƙirƙira wani sashi a cikin mahallin taron da ke akwai, don haka kai tsaye zaku iya yin la'akari da lissafi na wasu sassa kuma tabbatar da cewa sabbin sassa sun dace daidai da abin da aka riga aka tsara.

Kafin ka fara zayyana, yana da mahimmanci don saita yadda kake son adana sabbin sassa. SolidWorks yana ba da manyan zaɓuɓɓuka guda biyu:

• Ajiye azaman fayil na waje: An ajiye ɓangaren azaman fayil daban (.SLDPRT) a wajen taron.
• Ajiye azaman kayan aikin kama-da-wane: An adana ɓangaren a cikin fayil ɗin taro, wanda ke sauƙaƙa gudanarwa a cikin ƙarin ayyukan da aka haɗa amma zai iya sa sake amfani da wahala.

Zaɓin ya dogara da bukatunku da tsarin aikin ku na yau da kullun. Idan kuna aiki tare da wasu masu amfani ko sake amfani da sassa, kuna son amfani da fayilolin waje. Idan rufaffiyar aikin ne, kayan aikin kama-da-wane na iya ba ku ƙarin ƙarfi.

Mataki-mataki: Yadda ake Ƙirƙirar Sabon Sashe daga Majalisa

Don saka sabon sashe a matsayin wani ɓangare na taro, a sauƙaƙe bi wannan mahimman tsari:

1. Bude taron ku a cikin SolidWorks.
2. Jeka gunkin kayan aiki na taro kuma zaɓi zaɓi "Sabon yanki".
3. Danna wani jirgin sama mai tunani ko tsarin tsarin abin da ke akwai. SolidWorks zai buɗe zane ta atomatik akan waccan jirgin.
4. Zana zanen farko ko, idan ba kwa buƙatar zane nan take, kawai rufe wannan aikin don shirya ɓangaren.
5. Sashin zai bayyana a jera a cikin FeatureManager. Kuna iya danna-dama akansa don sake suna, wanda ke da amfani musamman don kiyaye tsarin aikinku.

Daga wannan lokacin, zaku iya fara ƙara ayyuka kamar extrusions, yanke ko chamfers a cikin mahallin taron, tare da fa'idar samun damar. ma'aunin ma'auni da geometric na sauran sassa don cimma cikakkiyar dacewa. Ana kiran wannan da alaƙar waje. Muna ba da shawarar ku sarrafa su a hankali don guje wa dogaro da yawa tsakanin abubuwan haɗin gwiwa, saboda wannan na iya rikitar da kiyaye ƙira na dogon lokaci.

Ajiye sabbin abubuwa a cikin mahallin

Kamar yadda aka ambata a sama, lokacin da kuka ƙirƙiri sabon sashe a cikin taro, SolidWorks zai tambaye ku yadda kuke son adana shi. Ga ɗan ƙarin bayani kan bambance-bambance:

• Fayil na waje: Stores kamar kowane bangare. Ana iya samunsa ba tare da buɗe taron gabaɗaya ba.
• Bangaren zahiri: Wannan yana samuwa ne kawai a cikin taron kuma baya haifar da keɓantaccen fayil akan faifai. Mafi dacewa don yin samfuri ko lokacin da ba kwa buƙatar ɓangaren wajen taron.

Don canza wannan tsohuwar saitin ko daidaita shi a kowane lokaci, zaku iya zuwa wurin Zaɓuɓɓukan Abubuwan Daftarin aiki, a cikin saitunan SolidWorks.

Menene SolidWorks: Fasaloli, Lasisi, da Amfani

Haɗa guda da yawa zuwa ɗaya: Ƙirƙirar haɗin haɗin gwiwa

Wani fasali mai ƙarfi na SolidWorks shine ikon yin ƙirƙirar sashe ɗaya daga sassa da yawa da ke akwaiAna kiran wannan da "yankin haɗin gwiwa" kuma yana da amfani don ƙarfafa ƙira, kwaikwaya hanyoyin masana'antu ko kuma kawai don sauƙaƙe taro.

Yaushe za a yi amfani da yanki mai haɗin gwiwa?

Wannan hanya tana da kyau idan kuna da guda da yawa waɗanda koyaushe zasu tafi tare ko, a aikace, zasu yi aiki azaman raka'a ɗaya. Maimakon ware su, kuna iya haɗa su zuwa inganta aikin taro da sauƙaƙe wasu ƙididdiga ko kwaikwaya.

Mataki zuwa mataki don haɗa guda

Hanyar ita ce madaidaiciya madaidaiciya. Bi waɗannan matakan:

1. Primero, ƙirƙirar dukan guda cewa kana so ka shiga ka ajiye su.
2. Sa'an nan kuma ƙirƙirar taro tare da waɗancan guda da sanya su yadda kuke soAna iya sanya su taɓawa, haɗuwa, ko ma ɗaya a cikin ɗayan.
3. Ajiye taron, amma a buɗe ta.
4. Saka sabon sashe a cikin taron, kamar yadda muka gani a sashin da ya gabata.
5. Zaɓi jirgin sama ko fuska don sanya zane a kai. Tun da wannan haɗin haɗin gwiwa ne, ba kwa buƙatar yin aiki akan zanen a wannan lokacin, saboda haka zaku iya rufe shi kai tsaye.
6. A cikin FeatureManager, danna dama akan wannan sabon ɓangaren kuma yi amfani da zaɓi "Sake suna wani bangare" don gane shi da kyau.
7. Sannan kunna kayan aiki "Daure" a cikin PropertyManager. Anan, zaɓi duk sassan da kuke son haɗawa.
8. Daidaita zaɓuɓɓuka bisa ga buƙatunku (ƙaƙƙarfan ɗabi'a, jikkunan da aka haɗa, da sauransu)
9. Danna Ok don ƙirƙirar sabon haɗin haɗin.

Daga wannan lokacin, za ku sami yanki guda ɗaya wanda ke wakiltar cikakken ƙarar duk na asali. Kuna iya amfani da wannan fasaha don ƙirƙirar abubuwa kamar akwatunan welded, sifofi ko gyare-gyaren jikinsu wanda ya ƙunshi guda da yawa.

Ƙarin shawarwari don yin aiki yadda ya kamata tare da sassa a cikin majalisai

Lokacin aiki a cikin mahallin cikin taro, yana da sauƙi a rasa ganin wasu abubuwan da za su iya shafar kwanciyar hankali na ƙira. Ga wasu shawarwari:

• Sarrafa dangantakar waje da kyauWaɗannan alaƙa suna haɗa yanki ɗaya zuwa wani, kuma idan ba a kiyaye su ba, na iya haifar da gyara don haifar da canje-canje maras so.
• Yi amfani da bayyanannun sunaye masu daidaito ga kowane sabon bangare. Wannan zai taimaka muku gano al'amura, bincika nau'ikan, da kuma kula da gano ƙira.
• Kada ku wuce gona da iri iri-iriSuna da amfani, amma a cikin hadaddun ayyuka suna iya hana aikin haɗin gwiwa saboda ba a samo su azaman fayilolin mutum ɗaya ba.
• Yi amfani da gyare-gyare a cikin mahallin don inganta dacewa tsakanin abubuwa kuma guje wa kurakuran taro.

Buga edita da gudanar da taro

Da zarar kun ƙirƙiri sassa da yawa ko majalisai, zaku iya sake gyara su cikin sauƙi. Don yin wannan:

• Danna-dama a taron a cikin bishiyar ƙirar FeatureManager ko kai tsaye a cikin yankin zane.
• Zaɓi « Gyara taro: » ko amfani da zabin Gyara bangaren daga toolbar.

Wannan zai ba ku damar canza sassa ɗaya, ƙara ƙarin abubuwa, canza wurare, ko sabunta alaƙa. Yana da mahimmanci a tuna cewa kowane canji zai iya shafar gaba ɗaya, don haka koyaushe yi kwafin ajiya kafin yin manyan canje-canje.

Ƙirƙirar ƙirƙirar sassa a cikin SolidWorks daga taro, da kuma fasahar haɗa abubuwa da yawa, zai ba ku damar yin aiki da kyau da kuma rage kurakuran ƙira. Ko da yake yana iya zama kamar fasaha da farko, tare da aiki ya zama kayan aiki mai mahimmanci a cikin kowane tsarin aikin injiniya ko masana'antu.

Babban Koyarwa: Inganta Tsarin Motocin Lantarki tare da Ansys Motor-CAD